top of page
Installation


Installing Highpoint Deck Lights is made simple by following our step by step instructions. Installing our lights will require the use of these basic tools which may differ depending on the fixture chosen; drill, 3/8” drill bit, 3” forstner/hole saw, tape measure, writing instrument, silicone filled wire nuts, low voltage wire, Flathead and Philips screw drivers, insulated wire tacks. You can find a specific list of tools needed for your fixture on the links below. If you have any questions during your install, please do not hesitate to contact us at: (888) 582-5850.

Warranty
bottom of page